LININGS
TIMBER STACK PANEL
Timber Stack Panel has been uniquely designed from a selection of recycled Cedar to form a feature wall that can dramatically transform your internal and external living spaces. Stack Panel is manufactured in Australia from recycled Western Red Cedar off cuts from furniture manufacture. The product is laminated with top grade epoxy glues.
As well as raw Cedar, these easy to use panels (750mm x 150mm) come in 6 pre-stained options:
1. Raw Cedar
2. Washed (White) Cedar
3. Black Japan Stained Cedar
4. Walnut Stained Cedar
5. Teak Stained Cedar
6. Clear Coat Cedar
These eco friendly panels have great acoustic properties and applications include wall panelling in music rooms, home theatres, cafes and shop fitouts. Simply glue to walls, doors and panels. Stack Panel can also be used in outdoor living spaces. It's so easy.
A large display has been installed in our Tooronga showroom. See our gallery for project applications.
Key Features:
Each panel weighs approximately 2kg. 1m2 weighs approximately 15kg. Approximately 8 panels per m2. Panel size and weight may vary.
Installation Guide:
Step 1:
Stack Panel must be installed onto a solid surface, e.g. brick, rendered brick or fibrous cement sheeting. The surface must be clean and free of dirt and oil.
Step 2:
Adhesive must be applied to the back of each Panel with an 8mm notch trowel and then placed on the wall. Each panel when laid should be tapped into place so the adhesives take hold.
Step 3:
Set up the first layer of Panels with a level sitting on 5mm packers to allow for an expansion gap.
Step 4:
Start to lay Panels in a staggered brick like form leaving a 8mm gap at the top of wall for an expansion gap.
Recommendations:
All panels should be cut on drop saw for timber and ripped down with a circular saw. External corners should be mitred using the same panel to match or using the half in half system, where the bottom half of the panel gets cut out and the top half of the other panel gets cut out to form an external corner. All safety equipment should be used including ear muffs, eye protection and a dust mask.
The recommended adhesive is Bostik Ultraset Overlay Brown.
|
